 Poles: The child safety fence poles are completely rust proof.
The outside layer is durable baked-on TGIC powder coat finish aluminum, followed by a PVC
insert spanning approximately halfway up the pole, and finished with a ½” stainless steel
rod that goes in the ground. Where the pole meets the ground is the focal point for all
child safety fence poles, meaning if force is exerted on the pole that point is where
the force will have the most impact. In fact the poles can withstand 200 lbs. of pressure.
You can rest assured you have the toughest child safety fence around because at that point
there is aluminum, PVC and a ½” of solid stainless steel, the strongest combination available.
The pole design also means smaller holes and less of a scar on the face of your pool deck.
|
 Sleeves: LifeFence.com’s sure-grip plastic sleeves maintain the integrity on the concrete and protect the finish on the poles. Designed for easy removal and re-insertion of your child safety pool fence. These sleeves come designed with special ridges designed to hold your sleeve in while pulling your pole out.
Diameters: - Inside - 1/2"
- inOutside - 9/16" in
|
 Pole Caps: Each pole child safety pool fence pole comes topped with a EZ-Grip rubber cap. Not only is a durable top to protect the finish of your pole when the child safety pool fence is laid down but also gives you a EZ gripping point to squeeze the poles together and release the tension so you can unhook your hook and eyes.
|
 Hook and Eyes: Every successful child safety pool fence needs a quality locking mechanism. The LifeFence.com hook and eyes are stainless steel and spring loaded. Making each connection rust proof and child proof.
|
 Fabrics: Our child safety pool fencing is has absolutely no finger or toe holes for climbing and is also UV resistant. The top and bottom comes with double-side protection using multi-stitching of the fencing material. Thus preventing any possible threading of the fence at its edges. All of our fencing mesh comes in standard black. We based this using the same principles as top television tube manufacturers, black allows for maximum color to penetrate from the background. Televisions manufacturers found that by making the back of the television tube black; colors would remain crisp, clear, and undistorted. Our fences work the same way, allowing your eye to capture all the vibrancies and colors of your landscape while making the fence less noticeable.
|
 Adjustability: Our child safety pool fence comes in 10’ sections but it is easy to modify. Every pole is attached to the mesh by a backing and stainless steel screws. If you remove the stainless steel screws you can move the pole to where you need it on the mesh. Basically because of our flexible system you can have as many poles as you want, end sections where you want, and fit any area or pool size. Changes in fence directions can be made every place you have a pole.
|
 Measuring and Installation: Our child safety pool fence is easy to install, just watch our online video (click on installation link at top of page) To measure the fencing you need, simply lay out something long and flexible (a hose, yarn or rope works nicely). Shape it in the line you would like your child safety pool fence to run, taking into account all curves. Mark the beginning and end point, then pull it straight. Now you can measure with a measure from the beginning to the end. Order enough 10’ sections to cover the total distance measured. Remember, if your number is not an even multiple of ten you can still use this fence, you will just modify the last section.
|
 Ground Caps: Every ground sleeve for your child safety pool fence comes with a ground cap. These is for the winter months when you may be taking your fence down for the season, or when guests come over and you take down the child safety pool fence. Not only do the caps keep water out of the holes, but they also add to the overall aesthetics of your pool deck.
|
