GTO PRO SW2002XL Dual Gate Opener

The PRO SW2002XL Dual Opener can be used in residential applications including automating gates made of farm tubing, steel, aluminum, wood, and chain link, along with many other gate types. This opener can be set on the left or right and is used in the standard pull-to-open operation. By adding the push-to-open bracket accessory (not included) the PRO SW2002XL can be used to push the gate open away from the property with the arms still mounted on the inside.

The PRO SW2002XL Dual Opener is a low voltage system, eliminating the need to run 110 AC to your gate. Simply run 16-gauge low voltage to a household outlet within 1000’ of the operator or use a solar panel. With the PRO SW2002XL's oversized control box you can house (2) 7 amp/hour batteries to accommodate higher opening cycle situations and extra storage for solar. (Second battery is not included).

The PRO SW2002XL Dual Opener features:

• Soft Start/Soft Stop – Soft start/soft stop is a feature in which the control board, during the set up process, learns where your opening and closing points are for the swing of the gate. Then during normal operation the gate operator automatically slows the motion of the gate to smoothly meet with the gates destination point. This feature can also be turned off.
• Closing Timer – Set your gate to close between 0 and 120 seconds after reaching the full open position or turn this option off to leave it open until an entry device activates closing motion.
• Learn Mode – With the PRO SW2002XL the learning process, the end points are determined by the user via remote. A simple press of the transmitter tells the opener where to stop and when the opener is set to the desired stop points, save the settings on the board.
• Oversized Control Box Housing – PRO SW2002XL oversized boxes can house 2) 7 amp/hour batteries and is rated for outdoor use.

The PRO SW2002XL Dual Opener can be used with GTO Inc.’s complete line of accessories including keypads, transmitters, exit wands, gate locks, solar panels, and more.

The GTO Pro SW2002XL will operate gates up to 12’ (3 m) long and weighing up to 400 lbs. (182 kg) each leaf; if all proper installation procedures have been followed. Note that ball bearing hinges should be used on all gates weighing over 250 lbs (113.4 kg).

FEATURES

• • Features GTO/PRO’s true soft start and stop operation. Open and Close times from 15 seconds.
• • Full systems capable, single/dual control board includes an adjust able obstruction sensing, and auto close settings.
• • U.L. rated for Class I, II, III & IV. System certified to be in compliance with U.L. 325, 5th edition.

CONTROLS

• • The GTO/PRO® control board can be programmed for pull-to-open or push-to-open.
• • Adjustable auto close, obstruction sensitivity and dual gate sequencing.
• • Auto-memorization of digital transmitter code.
• • Charging is regulated circuit on control board.
• • GTO/PRO® remote-mounted 318 MHz RF receiver.

DRIVE

• Powered by: a reliable 12 Volt (120 Watt) DC motor, 16:1 planetary gear drive system.
• Temperature rating: of motor:-5°F (-28°C) to +160°F (71°C).
• Opening time: from 15 seconds.
• Range of arm stroke: is up to 11” (.3 m)
• Operator length with arm fully retracted is 33.25” (.8 5m), mounting point to mounting point.

POWER

The PRO-SW2000XL system is powered by one 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included). Battery charge is maintained by a120V AC/60 Htz input and 18V AC at 40 VA. output, transformer rectified to 14V DC through control board.

Click here to view the product manual on www.gtoinc.com

QB ID: PRO SW2002XL